Whole House fans
   
             
   
Buy a Heat Recovery Ventilator,
to get rid of bad air!
 
Click Here to See
Our Interactive House!
 
Tamarack Whole House Fans
 HV1000-DB
 HV1600-GDR
 HV1450 Evergreen
 Ghost Attic Fan
 TC1000-H
 Cape Back Draft
 
Qmark
 AGV14 Gable Attic Fan
 GV16 Gable Attic Fan
 RV16 Attic Exhaust Fan
 ASRV14 Attic Exhaust Fan
 A24DD House Exhaust Fan
 
QuietCool
 QC 1500 Whole House Fan
 QC 2250 Whole House Fan
 QC 4500 Whole House Fan
 
Solatube
 Roof Solar Attic Fan
 Gable Solar Attic Fan
 Solar Skylights
 
Fantech
 Heat Recovery Ventilator
 Energy Recovery Ventilator
 HEPA Filters
 Fantech Accessories
 
Ventilation Controls
 Airetrak
 
 PDF Manuals
 
 Contact Us
 

SolaTube Tubular Skylight Techs/Specs and manuals

Brighten Up® Tublular Skylight Materials:

  1. Roof Dome: Injection molded, impact-resistant, acrylic with UV protective characteristics. Classified as CC2 material, .125" thick, with maximized visible light transmission of 92%.
  2. Light Intercepting Transfer Device (LITD®) increases daylight collection and harvesting for low sun angles, resulting in increased light output. Spectralight® Infinity. For specifications see # 6 below.
  3. Dome Ring: Durable PVC material.
  4. Dome Seal: Black breathable weather strip material with 0.25" pile.
  5. Roof Flashing: Metal with protective powder coating complements roofing materials and combats corrosive material. Alternative Roof Flashing: CC2 long-lasting polypropylene, 30% mica-filled for added strength and durability.
  6. Spectralight Infinity Tubing: Fabricated from aluminum sheet meeting the requirements of ASTM B 209, alloy and temper required by the manufacturer to suit forming operations and finish requirements, .015 ” thick.
    Finish: Reflective film provides over 99% visible reflectance . Laminated with thermoset adhesive to provide permanent bond to substrate. Protected by PET film for long-lasting reflectivity.
  7. The 30 degree angle adapters: Spectralight Infinity tubing fabricated from aluminum sheet meeting the requirements of ASTM B 209, alloy and temper required by the manufacturer to suit forming operations and finish requirements, .015” thick. Optional 0-90 Degree extension tube also available (.018" thick).
  8. Ceiling Ring: Durable ABS non-corrosive material.
  9. Ceiling Diffuser: Die cut polycarbonate plastic classified as CC2 material, .022" thick, flush diffuser with frosted finish .050" thick or curved diffuser with prismatic finish .100” thick.
  10. Diffuser Clips: Natural/White, 6/6 nylon. Comes attached to the fastener tree.
  11. Diffuser Seal: Extruded EPDM with adhesive backing, cut to length and pre-assembled in dress ring.
  12. Dress Ring: Durable ABS non-corrosive material.

Recommended Maximum Solatube Tube Runs:
  • 10 Inch tube - Brightens up to 20 Feet
  • 14 Inch tube - Brightens up to 30 Feet

SolaTube Skylights Warranty:
  • 5 year warranty on solar panel and motor
  • 10 year warranty on all other components
 

Product PDFs

Return to Solatube Start Page

Return to Whole House Fans Direct